How To Set "Stop Only At Off Time - Mitsubishi Heavy Industries SC-SL2NA-E Manual Del Propietário

4. How to Set "STOP only at Off time"

1 to 8. Set the program number.
Execute Steps 1 to 8 on Pages 19 to 20.
9. With the On time (hour) section displaying "--", press the SET button.
If you press the RESET button with the On Time input, the On time (hour) display section becomes "--".
10. Press the SELECT (
11. Press the SET button.
The Off time (hour) lights up and the Off time (hour) is decided.
12. Press the SELECT (
13. Press the SET button.
The Off time (minute) is decided and this completes the setting. "_" lights up under the set day of the week
(TUE→TUE) and the display becomes as in the diagram. Select the next program number.
Setting summary
(1) Select the
(2) Select the group number to set.
(3) Select the day of the week to set.
(4) Select the program number.
(5) Set the contents of the program.
1. On/Off time
(5-1) Set the On time.
(5-2) Set the Off time.
(5-3)
10 9, 11
or ) button or a GROUP No. button to set the Off time (hour).
or ) button or a GROUP No. button to set the Off time (minute).
.
2. On time and
TEMP (temperature setting)
Set the On time.
Set the Off time to "--:--".
Set the temperature.
3. RUN only at On time
Set the On time.
Set the Off time to "--:--".
Set the temperature to "--" °C.
– 22 –
4. STOP only at Off time
Set the On time to "--:--".
Set the Off time.