How To Set Run Details - Mitsubishi Heavy Industries SC-SL2NA-E Manual Del Propietário

How to Set Run Details

This sets the operation mode, temperature, fan speed, and louver direction.
1. Press the ALL / GROUP / ONE button and select either
The options are displayed in the order.
2. Press the SELECT (
If ALL is selected in Operation 1, skip Operation 2.
To select all the groups, select "88".
3. Press the MODE button and select the operation mode.
The options are displayed in the order.
On some models of indoor units, a control select button can be set to display "AUTO". For more information
on the control select button, consult your dealer.
4. Press the TEMP button (
Set between 18.0°C and 30.0°C.
Note
A measure of temperature setting
Cool ................26 to 28°C
Dry .................21 to 24°C
Heat ...............22 to 24°C
Fan .................No temperature setting is required.
5. Press the FAN SPEED button and set the fan speed.
rd nd
3 speed 2
The options are displayed in the order.
4th speed
The unit operates with the maximum fan speed.
On some models of indoor units, a control select button can be set to display "4th speed".
For more information on the control select button, consult your dealer.
6. Press the LOUVER button and set the louver direction.
The options are displayed in the order.
7. Set ENABLE / DISABLE operations for each remote control function.
1 2
or ) button to set the group number or unit number.
or ) to set the temperature.
st nd
speed 1 speed 2
1
3 5 6 4
,
rd
speed 3 speed 4
2 3 4
– 18 –
, or .
th
speed
4
Page 14