Troubleshooting - Error Codes - RIDGID micro LM-400 Manual Del Operario

All manuals and user guides at all-guides.com
micro LM-400 Laser Distance Meter

Troubleshooting - Error Codes

CODE CAUSE
204 Calculation error.
208 Received signal too weak, measurement
time too long, Distance > 229 ft (70 m).
209 Received signal too strong. Target too re-
flective.
252 Temperature too high.
253 Temperature too low.
255 Hardware error.
18
CORRECTIVE MEASURE
Repeat procedure.
Use target plate.
Use a commercially available target plate.
Cool down instrument.
Warm up instrument.
Power the unit OFF then ON, if the symbol
still appears, please contact technical sup-
port.