Kalorik USK CM 6 BT Manual De Instrucciones página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
Open the lid and place the filter holder into the coffee maker.
Turn to lock the filter holder. Put a filter in the filter holder and,
using the provided scoop, add the desired quantity of ground
coffee in the filter. Replace the filter holder, making sure it is
placed correctly.
Never forget to close the lid of the water tank and place the
glass carafe on the warming plate before switching on your
coffee maker.
Press the "start/cancel" button to turn on the coffee maker. The
pilot light of the switch will be illuminated, indicating that your
appliance works. Make sure that you never let an empty jug on
the appliance.
When you remove the jug from the appliance, a non-drip valve
will automatically operate to stop any drops of coffee dripping
onto the hotplate. Replacement of the carafe automatically
opens the non-drip valve and allows remaining coffee to filter
trough into the jug. This is a temporary function (for example, to
pour one cup of coffee) otherwise there will be a water overflow.
Wait until the brewing process is finished and the filter has run
empty before removing the jug.
DECALCIFICATION AND CLEANING
Decalcifying the coffee maker prolongs its life span. For
decalcification only use products especially made for
decalcification of coffee makers.
Never use a dishwasher to clean the jug. Just clean it in soapsuds.
To clean the plastic parts of the appliance, use a humid, non
abrasive cloth.
PRACTICAL HINTS
When you notice that the coffee making process is longer than it
should be it is probably time to decalcify the appliance. Do not
wait until the situation gets worse. The decalcifying frequency
depends on the amount of lime in water and therefore can be
different from family to family. Therefore it is important to pay
attention to this. A good maintenance of your appliance will
prolong its lifespan. Guarantee claims will not be accepted for
the replacement of a heating element full of scale.
5
USK CM 6 Bt - 070809

Publicidad

Tabla de contenido
loading

Tabla de contenido