Behringer 2500 Serie Guia De Inicio Rapido página 3

Ocultar thumbs Ver también para 2500 Serie:
Tabla de contenido

Publicidad

4
FILTAMP MODULE 1006
FILTAMP MODULE 1006 Controls
(1)
(4)
(5)
(6)
(7)
(8)
(12) (13) (14) (15) (16) (17)
(2)
(3)
(9)
(10)
(11)
Controls
FILTER – Adjusts the cutoff frequency for the filter.
(EN)
(1)
FILTER RESONANCE – Boosts the resonance frequencies selected
(2)
with the Filter knob, potentially causing VCF oscillation.
AMPLIFIER GAIN – Controls the level of the VCA.
(3)
KEYBOARD knob – Attenuate the voltage connected to the KYBD
(4)
input, which controls the cutoff frequency of the filter.
IN B knob – Adjusts the level of the signal connected to the
(5)
IN B input.
CV 2 to VCF knob – Attenuate the voltage that is passed from the
(6)
CV 2 input to the VCF.
IN A knob – Adjusts the level of the signal connected to the
(7)
IN A input.
CV 1 to VCF knob – Attenuate the voltage that is passed from the
(8)
CV 1 input to the VCF.
EXPONENTIAL/LINEAR switch – Select between a linear or more
(9)
natural exponential VCA response.
CV 2 to VCA knob – Attenuate the voltage that is passed from the
(10)
CV 2 input to the VCA.
CV 1 to VCA knob – Attenuate the voltage that is passed from the
(11)
CV 1 input to the VCA.
IN A – Connect an input signal via 3.5 mm TS cable.
(12)
IN B – Connect an input signal via 3.5 mm TS cable.
(13)
KYBD – Connect a voltage that can be used to control the VCF
(14)
frequency.
CV 1 – Connect a voltage that can be used to control the VCF
(15)
frequency or VCA level.
CV 2 – Connect a voltage that can be used to control the VCF
(16)
frequency or VCA level.
OUT – Send the processed signal to other modules via 3.5 mm
(17)
TS cable.
5
Quick Start Guide

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Filtamp module 1006

Tabla de contenido