Publicidad
Idiomas disponibles
Idiomas disponibles
EXPLANATION OF SYMBOLS
The unit complies with CE standards
For indoor use only
Minimum distance between the appliance and other objects
0.5m
Don't stare into the light beam
SAFETY INSTRUCTIONS
•
Please keep this User Manual for future reference. If you sell the unit to another user, be sure that he also
receives this instruction booklet.
•
Unpack and check the unit carefully that it has not been damaged during transport before using the unit.
•
Before operating, ensure that the voltage and frequency of power supply match the power requirements of
the unit.
•
The unit is for indoor use only in a dry location.
•
The unit is for decorative purposes only. It is not suitable for normal household illumination.
•
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be
sure that no ventilation slots are blocked.
•
Disconnect mains power before servicing.
•
Make sure there are no inflammable materials close to the unit during operation.
•
Maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the fixture at temperatures higher than
this.
•
In the event of serious operating problem, stop using the unit immediately.
•
Never try to repair the unit by yourself. Repair carried out by unskilled people can lead to damage or malfunc-
EN
tion. Please contact the nearest authorized technical assistance center and always use the same type of spare
parts.
•
The light source of this device is not replaceable. If it is defective, the entire unit must be discarded.
•
Don't connect the device to a dimmer pack.
•
Don't stare into the light beam
OPERATION
The device operates to the rhythm of the music. When there is no sound, the unit runs automatically.
Plug the unit into an appropriate mains outlet that supplies the required voltage for the unit and it will start wor-
king.
FIXTURE CLEANING
The cleaning of optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning
frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty sur-
rounding can cause greater accumulation of dirt on the unit's optics.
•
Clean with soft cloth using normal glass cleaning fluid.
•
Always dry the parts carefully.
•
Clean the external optics at least every 20 days.
SPECIFICATIONS
Voltage: ...........................................................................................................................220-240V~ 50/60Hz
Fuse: ............................................................................................................................................................2A
Power consumption: .................................................................................................................................15W
Light source - ASTRO: ..............................................................................................................3pc of 3W LED
Light source – UFO: ....................................................................................................48 x 10mmØ RGB LEDs
Operating modes: ..................................................................................................... Sound control, Auto-run
Dimensions ...................................................................................................136 (L) × 136 (W) × 136 (H)mm
N.W: .........................................................................................................................................................280g
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local au-
thorities or your dealer about the way to proceed.
2
Manual - UFO-ASTRO-BL
INSTRUCTION MANUAL
©Copyright LOTRONIC 2020
Publicidad
