Makita DMR108N Manual De Instrucciones página 10

OPERATION
1. Press the Power button
radio.
2. Press the Source button
radio mode.
3. Press and hold the Tuning control knob
out an auto-tune. Your radio will scan up the AM/FM
band from the currently displayed frequency and will
stop scanning automatically when it finds a station of
sufficient strength.
4. After a few seconds the display will update. The
display will show the frequency of the signal found.
5. To find other station, press and hold the Tuning
control knob as before.
6. When the end of the waveband is reached your radio
will recommence tuning from the opposite end of the
waveband.
7. Rotate the Tuning control knob
sound level as required.
Note:
● While adjusting the volume, make sure the FM/AM
is NOT flashing on the screen.
● If AM/FM is flashing on the screen, it allows you
to tune the stations manually (see the section of
"Manual tuning – AM/FM" for more detail).
8. To switch off your radio press the Power button
.
Manual tuning – AM/FM
1. Press the Power button
radio.
2. Press the Source button
radio mode.
3. Press the Tuning control knob
the FM or AM is flashing on the display.
Note:
● FM/AM will flash approx. 10 seconds. Within this
period, only manual tuning is allowed.
● If volume adjustment is desired while FM/AM is
flashing, press the Tuning control knob to stop the
flash and you can rotate the Tuning control knob to
adjust sound level.
4. Rotate the Tuning control knob
station.
5. When the end of the waveband is reached your radio
will recommence tuning from the opposite end of the
waveband.
6. Use the Tuning control knob
level as required.
Presetting stations in AM/FM mode
There are 5 preset stations each for AM and FM radio.
They are used in the same way for each waveband.
to switch on your
to select AM or FM
to carry
to adjust the
to switch on your
to select AM or FM
and you will see
to tune to a
to adjust the sound
10 ENGLISH
1. Press the Power button
radio.
2. Press the Source button
waveband. Tune to the required radio station as
previously described.
3. Press and hold the required Preset button (1 to
5) until the display shows "P4" for
example after the frequency. The station will be stored
using the preset number. Repeat this procedure for
the remaining presets as you wish.
4. Preset stations which have already been stored may
be overwritten by following the above procedure if
required.
Display modes – FM
Your radio has a range of display options for FM radio
mode.
1. Repeatedly press the Menu/Info button
the RDS information of the station you are listening
to.
a. Station name Displays the name if the station
being listened to.
b. Program type Displays the type of station being
listened to such as Pop, Classic,
News, etc.
c. Radio text Displays radio text message such
as new items etc.
d. Year/Day Displays the year and day of the
week according to the date setting
of your radio.
e. Date/Day Displays the date and day of the
week according to the date setting
of your radio.
f. Frequency Displays the frequency of the FM
for the station listened to.
FM stereo (auto)/mono
If the FM radio station being listened to has a weak
signal some hiss may be audible. It is possible to reduce
this hiss by forcing the radio to play the station in mono
rather than stereo.
1. Press the Power button
the FM band and tune to the desired FM station as
previously stated.
2. Press and hold Menu/Info button
menu setting.
3. Rotate the Tuning control knob
mono setting shows on the display. If the setting is
Auto press the Tuning control knob to switch to Mono
mode to reduce the hiss. Press the Tuning control
knob to select the option.
to switch on your
to select the desired
to view
as needed to select
to enter the
until the FM Auto/