Radio Data System (Rds); Setting The Alarm Clock - Makita DMR108N Manual De Instrucciones

Recalling a preset in AM/FM mode
1. Press the Power button
radio.
2. Press the Source button
radio mode.
3. Momentarily press the required Preset button
to cause your radio to tune to one of
the stations stored in the preset memory.
Setting the time and date format
The clock display used in stand-by mode and on the
playing mode screens can be set to different format. The
selected format is then also used when setting the
alarms.
1. Press and hold the Menu/Info button
the menu setting.
2. Rotate the Tuning control knob
xxH" appears on the display and press the Tuning
control knob to enter the setting. You will see the
time format begins to flash.
3. Rotate the Tuning control knob
12 or 24 hour format. Press the Tuning control knob
to confirm your choice of clock format.
Note:
If the 12 hour clock format is chosen, the radio
will then use the 12 hour clock for the setting.
4. Press and hold the Menu/Info button
the menu setting.
5. Rotate the Tuning control knob
THU APR 3) appears on the display and press the
Tuning control knob
see the date format begins to flash.
6. Rotate the Tuning control knob
desired date format. Press the Tuning control knob
to confirm your choice.
Setting the clock time and date
1. Press and hold the Menu/Info button
2. Rotate the Tuning control knob
ADJ" appears on the display. Press the Tuning control
knob to enter the setting.
3. The hour setting on the display will begin flashing.
Rotate the Tuning control knob to
desired hour, and press the Tuning control knob
to confirm the setting. Then rotate the Tuning control
knob to select the desired minute, and press the
Tuning control knob
4. Rotate the Tuning control knob
appears on the display. Press the Tuning control knob
to enter the setting.
5. Rotate the Tuning control knob
desired year and press the Tuning control knob
to confirm the setting. Then rotate the Tuning control
to switch on your
to select AM or FM
to enter
until "CLOCK
to select either
to enter
until a date (e.g.
to enter the setting. You will
to select the
.
until "CLOCK
select the
to confirm the setting.
until "DATE ADJ"
to select the
knob to select the desired month, and press the
Tuning control knob
rotate the Tuning control knob
desired date and press the Tuning control knob
to confirm the setting.

Radio Data System (RDS)

When you set the clock time using the RDS function,
your radio will synchronize its clock time whenever it
tunes to a radio station using RDS with CT signals.
1. When tuning to a station transmitting RDS data,
press and hold the Menu/Info button
2. Rotate the Tuning control knob
and a clock symbol appear on the display. Press the
Tuning control knob
3. Rotate the Tuning control knob
appears on the display. Press the Tuning control knob
to confirm the setting. The clock time of the radio
will set up automatically according to the RDS data
received.
4. When the action is completed, the RDS icon will
appear on the LCD display indicating the radio time is
RDS clock time. The radio clock time will be valid for
5 days each time the radio time is synchronized with
RDS CT.

Setting the alarm clock

Your radio has two alarms which can each be set to
wake you to AM/FM radio or buzzer alarm. The alarms
may be set while the unit is in standby mode or while
playing.
a. Setting radio alarm time:
1. The radio alarm can be set either when radio is on or
off.
2. Press and hold the radio alarm button
radio alarm symbol and the display hour will flash
along with a beep.
3. During radio alarm symbol
Tuning control knob
Tuning control knob
Then rotate the Tuning control knob
minute and press Tuning control knob
minute setting.
4. Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAY – the alarm will sound only on weekdays
WEEKEND – the alarm will sound only at weekends
Press the Tuning control knob
setting.
5. During radio alarm symbol is flashing, rotate Tuning
control knob
11 ENGLISH
to confirm the setting. Then
to select the
until "RDS CT"
to enter the setting.
until "RDS CT"
flashes, rotate
to select the hour and press
again to confirm hour setting.
to confirm the
to select desired wake-up band and
.
, the
to select the
to confirm