Uline H-9440 Manual Del Usuario página 2

CONNECTING STAGE PIECES
1. Lift the stage platform so the inner edge tilts
downward. Roll the stage piece slightly until the steel
hooks on the inner edge slide under the frame of
the other stage piece. (See Figures 6-7)
Figure 6
Figure 7
2. Set the platform down and apply pressure to the
top of both stage pieces until they sit flat on ground.
(See Figure 8)
3. To remove, lift the stage platform so the inner edge
tilts downward and the hooks release. Roll it away
from the other stage piece. (See Figure 9)
Figure 9
PAGE 2 OF 6
ASSEMBLY CONTINUED
TAKING DOWN
1. Set the stage on its side.
Holding the stage platform
firmly with one hand, use
the other to press the center
mechanism on the leg
assembly. (See Figure 10)
2. Fold leg assembly against the
underside of stage platform. (See Figures 11-12)
3. Repeat process on the other side. (See Figure 13)
Figure 13
Figure 8
1-800-295-5510
uline.com
NOTE: When folding legs in, make sure leg
height is at the lowest setting.
Figure 11
Figure 10
Figure 12
0921 IH-9440