1. Place deck on a smooth, non-marring surface
with top side down. Mount casters to deck with
large bolts and large washers. Ensure the two
swivel casters are installed on the end with rollers.
3. Install tray support bars to the inside tube
dividers and secure with small bolts, small
washers, and small lock nuts.
PAGE 2 OF 6
ASSEMBLY
2. Insert two inside and two outside tube dividers
into the sockets of the deck. Insert long bolts,
small washers and small lock nuts and tighten.
4. Insert tray between tray support bars.
1-800-295-5510
uline.com
0221 IH-1823