Uline H-6324 Guía Rápida

H-6324, H-6325, H-6326
π
H-6608, H-6609
BASKET TRUCK LID
TOOLS NEEDED
Cordless Drill
Basket Truck Lid x 1
1. Place basket truck lid on the top of the basket truck
frame. Push down until all brackets fit securely on
frame. (See Figure 1)
Figure 1
2. Open basket truck lid so it is on the side of the truck.
Using a cordless drill and a 1/4" drill bit, drill through
the top vinyl of the basket truck where there are
holes in the brackets. (See Figure 2)
Figure 2
PAGE 1 OF 3
1/4" Drill Bit 2 Phillips Screwdrivers
Lid
Bracket
1-800-295-5510
uline.com
PARTS
Binder Post x 6
ASSEMBLY
3. Insert binder post and screw through bracket hole
and truck. Make sure binder post is on the outside
of the truck. Tighten with Phillips screwdrivers.
(See Figure 3)
Figure 3
Phillips
Screwdriver
4. Repeat steps 2 and 3 to secure all brackets to the
basket truck.
Para Español, vea página 2.
Pour le français, consulter la page 3.
Screw x 6
Binder Post Screw
Phillips
Screwdriver
0521 IH-6324