Uline H -7557 Manual Del Usuario

H-7557
SINGLE-SIDED PEGBOARD
FLOOR RACK
TOOLS NEEDED
10 mm 13 mm
Wrench Wrench
10 mm Nut 13 mm Nut
x 8 x 4
Concrete Installation
1. Take pegboard panel (A) and line up holes (B) (stamped into
the left and right side of the panel) to matching holes (C)
stamped into each side support panel. (See Figure 1)
2. Attach pegboard panel to side support panels using bolts and
nuts supplied. Eight 10 mm bolts in the bottom holes and four
13 mm bolts in the top holes. (See Figure 1)
PAGE 1 OF 6
18 mm 1/2" Diameter
Wrench Masonry Drill Bit
10 mm Bolt x 8
Anchor Bolt x 6
Figure 1
1-800-295-5510
uline.com
Eye Protection
PARTS
13 mm Bolt x 4
Side Support Panel x 2
ASSEMBLY
A
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
Pegboard
Panel x 1
0321 IH-7557
B
C