Noise/Vibration Information; Declaration Of Conformity; Battery Charging - Bosch ROTAK 34 LI Manual Original

OBJ_BUCH-882-003.book Page 26 Wednesday, March 24, 2010 10:57 AM
26 | English

Noise/Vibration Information

Measured sound values determined according to
2000/14/EC (1.60 m height, 1 m distance away).
Typically the A-weighted noise levels of the product are:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values (triax vector sum) determined accord-
ing to EN 60335:
Vibration emission value a
Uncertainty K

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical data" is in conformity with the fol-
lowing standards or standardization documents: EN 60335,
EN 50338 (battery powered product) and EN 60335 (battery
charger) according to the provisions of the directives
2006/95/EC, 2004/108/EC, 2006/42/EC, 2000/14/EC.
2000/14/EC: Guaranteed sound power level
Conformity assessment procedure according to Annex VI.
Equipment category: 32
Notified body:
SRL, Sudbury, England, Nr. 1088
Technical file at:
Bosch Lawn and Garden Ltd., PT-LG/EAE,
Stowmarket, Suffolk IP14 1EY, England
08
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
08.09.2009
F 016 L70 740 | (24.3.10)
h
Assembly
For Your Safety

Battery Charging

Observe correct mains voltage: The voltage of
the power source must agree with the voltage
specified on the nameplate of the unit. Equip-
ment marked with 230 V can also be connected
to 220 V or 240 V.
Use only the charging unit supplied. Only this
charging unit is matched to the lithium-ion bat-
tery used in the product.
3 600 ... H81 E..
dB(A) 81.0
dB(A) 89.4
dB =0.6
2
m/s =2.5
2
m/s =1.5
3 600 ... H81 E..
dB(A) 90.0
Warning! Switch off, remove the isolator
key and the battery before adjusting, clean-
ing or if cable is cut, damaged or entangled.
The blades continue to rotate for a few sec-
onds after the machine is switched off.
Caution – do not touch the rotating blade.
H81 J.. H81 K..
81.0 81.0
89.7 90.2
=0.3 =0.8
=2.5 =2.5
=1.5 =1.5
H81 J.. H81 K..
90.0 91.0
Bosch Power Tools