Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
When a cassette with the tab snapped out is inserted into the tape
unit, accidental erasing is prevented by a lever in the mechanism that
keeps the RECORD button from pressing down. Cellophane tape can
be place over the original recording. Similarly, you can record over
purchased pre-recorded cassettes.
PLEASE NOTE: Your unit is equipped with a cassette sensing
mechanism that prevents the RECORD button from being pressed
when a cassette is not in the unit.
Cleaning The Device
Iron oxide particles from the magnetic tape can build up on the parts
of the device that come in contact with/read the tape. These
deposits can cause incomplete erasing, muffled playback, and might
prevent the auto-stop function. To clean a cassette tape, open the
compartment door, push the PLAY button and gently clean the
heads, capstan, and pinch wheel with a head cleaner.
- Always unplug the power cord before cleaning, and allow 30
minutes drying time when using a liquid cleaner.
- Clean heads after every 25 hours of use.
- Demagnetize the head occasionally with a head demagnetizing
cassette (available from many audio equipment stores).
- Never use any metal objects on or near the tape heads.
- Do not allow any cleaning material to fall into the tape
assembly.
6
Publicidad
Tabla de contenido
