LauraStar MAGIC EVOLUTION Instrucciones página 9

Vertical removal of creases
Special materials
Using the Softpressing soleplate
The Softpressing soleplate must be used for dark materials that are likely to become shiny and synthetic
materials that might stick to the soleplate.
To use the Softpressing soleplate:
1. Place the iron in the soleplate.
2. Pull the spring towards the end of the iron as shown in the drawing. Wait for about 2 minutes for the
soleplate to reach the same temperature as the iron. This avoids droplets of condensation falling onto the
material. ALWAYS remove the Softpressing soleplate after use.
Make sure the Softpressing soleplate does not touch mohair, cashmere, velvet and
CAUTION
angora! Iron these materials at a distance.
• Contact with the Softpressing soleplate can cause severe burns and damage nearby
WARNING
objects.
• Misusing a hot iron with steam under pressure can cause severe burns.
All manuals and user guides at all-guides.com
Hang the garment on a coat
hanger or hold it up.
With a sweeping movement from
top to bottom, lightly touch the
material while giving short bursts
of steam.
Note: It is easy to remove creas-
es from most materials, except
for cotton, linen and some silks.
If it is difficult to remove the
creases from a material, iron it as
normal on the ironing board.
• Velvet
HOT
• Corduroy
• Jersey
6
Silk
Steam iron silk in the normal
way.
In the case of dark silk you are
advised to use the Softpressing
soleplate.
If you are not using the
Softpressing soleplate, steam
iron 1-2 in. from the surface of
the material, then finish by hand.