Uline H-7550 Instrucciones De Montaje página 3

5. Attach top shelf and top posts to bottom half of cart
using long hex bolts and nuts. Make sure large hole
in top corner of shelf lines up with hole in middle
shelf. Cart height can be adjusted by moving long
hex bolts and nuts to different desired levels.
(See Figure 5)
Figure 5
6. Attach left and right tray brackets to top shelf using
large phillips head bolts and small keps nuts.
(See Figure 6)
NOTE: Ensure that tray brackets are facing in
towards middle of cart and tray slides pull out
towards front of cart.
Figure 6
PAGE 3 OF 9
ASSEMBLY CONTINUED
Long
Bolt
Nut
Large
Bolt
Small
Nut
7. Align keyboard tray brackets with tray slides. Locate
tabs on sides of keyboard tray. At the same time,
pull down on tab on left side of keyboard tray and
push up on tab on right side of keyboard tray. While
doing this, carefully push keyboard tray into tray
slides until fully inserted. (See Figure 7)
Figure 7
8. Attach cord wrap bracket and power strip to top
shelf using self-tapping screws. (See Figure 8)
Figure 8
9. Ensure all nuts, bolts and screws are fully tightened.
1-800-295-5510
uline.com
Up
Down
Tray
Self-tapping
Screw
0721 IH-7550