D+H KA 34-K Manual Original página 5

Intended use
- Chain drive for electric opening and closing of
windows and flaps in the facade and roof area
- Operating voltage 230 VAC
- Suitable for indoor mounting only
Safety notes
Operating voltage 230 VAC!
Risk of injury from electric shock!
Do not reverse L+N! Connect PE!
- Connection must be carried out by a certified
electrical technician
- Danger of crushing hands and fingers!
- Keep people away from the operating area of the drive
- Keep children away from the control
- Observe pressure load diagram of the chain
- Use only in dry rooms
- Suitable for indoor mounting only.
Use rain detector in locations if there is a risk of rain
- This product may not be operated without the
covering stoppers, which are delivered with
bracket sets
- Use unmodified original D+H parts only
- Observe the bracket-set mounting instructions
Observe enclosed red safety note!
Pressure load diagram
Observe maximum pressure load of the chain!
Maximum pressure load of the chain is not
automatically identical with maximum pressure force
of the drive!
600
500
400
300
200
100
0
99.823.91 2.0/04/11
Stroke (mm)
Features
- Microprocessor controlled electronics
- Clamping protection for the main closing edge
- Relief of pressure on window gasket after closing
Scope of supply
Drive unit with 2.5 m PVC cable. Depending on the
type of window, different bracket sets are available
separately.
Dimensions
40 mm
Stroke
250
350
500
600
700
English
Stroke
A B
800 473
196 508 900 527
248 560 1000 577
323 635 1100 629
373 685 1200 679
423 735 1300 729
KA 34-K / KA 54-K
A B
785
839
889
941
991
1041
5/16