ChiQ FSD166NE4 Manual Del Usuario página 8

•Try to open the refrigerator door as less as possible, in this way can food safely and freshly kept for hours even in hot
summer.
•If you get the power outage notice in advance：
1) Adjust the thermostat knob to the high mode an hour in advance, so that foods get fully frozen (Do not store new
food during this time!). Restore the temperature mode to the original setting when power supply becomes normal in a
timely manner.
2) You can also make ice with a watertight container, and put it in the upper part of the freezer, so as to extend the time
for fresh food to be stored.
Note: Once the refrigerator is used, you'd better use it continuously; and under normal circumstance, do not stop its
use, so as not to affect the service life.
Defrosting
This appliance is designed with automatic defrosting function, and meantime it can be manually defrosted.
Changing the lamp
The LED lamp is used by the refrigerator for lighting, which features low energy consumption and long service life. In case
of any abnormality, please contact the after-sales personnel for visiting service.
Safety-check after maintenance
Is the power cord broken or damaged?
Is the power plug firmly inserted into the socket?
Is the power plug abnormally overheat?
Note: Electric shock and fire accident may be caused in case the power cord and plug is damaged or stained by
dust. If any abnormality, please unplug the power plug and get in contact with the vendor.
How to disassemble the parts.
Shelf:
Hold one end of the shelf, and lift it up while pulling it outward.
Flip cover:
Keep the flip cover in the vertical direction, align it with the rotating shaft opening on the right side, and pull it outward to
remove it;
During use of the refrigerator, do not close the door when the flip cover is opened, to avoid damaging the refrigerator
door!
VIII. Simple fault analysis and elimination
With regard to the following small faults, not every failure needs to be fixed by the technical service personnel; you can try
to solve the problem.
Case
•
Completely
non-refrigerat
ion
•Abnormal noise
•Poor refrigerating
efficiency
•Peculiar smell in
refrigerator
• Buzzer alarm
•All indicator lights
on the display
panel ON
Note: If the above descriptions are inapplicable to troubleshooting, do not disassemble and repair it yourself. Repairs
carried out by inexperienced persons may cause injury or serious malfunctioning. Contact the local store where your
purchase was made. This product should be serviced by an authorized engineer and only genuine spare parts should be
used.
When the appliance is not in use for long periods, disconnect from the electricity supply, empty all foods and clean the
appliance, leaving the door ajar to prevent unpleasant smells.
Inspection
Is power plug off?

Are breakers and fuses a broken?

No electricity or line trip?

Is refrigerator stable?

 Does refrigerator reach the wall?
Do you put hot food or too much food?

Do you open the door frequently?

Do you clip food bag to the seal of door?

 Direct sunlight or near a furnace or stove?
 Is it well-ventilated?
Temperature setting in too high?

 Any spoiled food?
 Do you need to clean refrigerator?
Do you pack food of strong flavors?

•
Is there any door opened?
•
Is the defrosting function enabled?
Solutions
Re-plug.

Opening the door and checking whether the

lamp is lit.
Adjusting refrigerator's adjustable feet.

 Off the wall.。
Putting food into refrigerator when hot food

becomes cool.
Checking and closing the door.

 Removing the refrigerator from the heat
source.
Emptying the distance to maintain good

ventilation.
Setting to the appropriate temperature.

 Throwing away spoiled food.
 Cleaning refrigerator.
Packing food of strong flavors.

•
Open the door, and close it again.
•
Hold down the SET key for 3s (for details, refer
to the Functions section about Defrosting)
10
EN