Vissani MD1821IM Guía De Uso Y Cuidado página 11

Installation Instructions - ( Bottom mount freezer )
9
Fixed water valve
□
Locate the pre-punched holes at the bottom right corner
of the back panel of the refrigerator. Align the water valve
bracket with the factory drilled holes, then use a Phillips
head screwdriver to drive the two self-drilling screws
through the bracket and into the cabinet.
Water valve and plastic water
11
supply tubing connection
□ Grasp the other end of the plastic tube and push it firmly
into the quick connection on the valve until it bottoms
out.
Connect the wiring harness to the
10
water valve
□
Connect the wiring harness to the water valve. Make sure
the connection is tight.
12
Plastic water supply tubing fixed
□ Clean the back of the cabinet with a commercial household
cleaner, ammonia, or alcohol before applying the clamps.
Secure the plastic water supply tubing to the back of the
cabinet with three plastic clamps.
11
Please contact 1-855-847-7264 for further assistance.
HOMEDEPOT.COM