Vissani MD1821IM Guía De Uso Y Cuidado página 7

Installation Instructions - ( Top mount freezer )
Adjust the leveling bracket to level
9
the ice maker
□ Adjust the leveling bracket to level the ice maker. The
ice maker is level when the gap between the freezer
wall and the ice maker is the same at the top and bottom.
With the ice maker level, insert the third ice maker
mounting screw at the bottom of the ice maker and
tighten.
11
Fixed water valve
□ Locate the pre-punched holes at the bottom right corner
of the back panel of the refrigerator. Align the water valve
bracket with the factory drilled holes, then use a Phillips
head screwdriver to drive the two self-drilling screws
through the bracket and into the cabinet.
10
Place the ice storage bin
□ Reinstall the freezer shelf and place the ice storage bin on
the shelf.
Connect the wiring harness to the
12
water valve
□ Connect the wiring harness to the water valve. Make sure
the connection is tight.
7
Please contact 1-855-847-7264 for further assistance.
HOMEDEPOT.COM