Tool Specifications; Noise/Vibration Information; Intended Use - Protool RGP 3 Manual Del Usuario

Tool Specifications

Renovation Grinder
Power consumption
No-load speed
Grinder spindle threads
Circumferential speed
Grinding disk dia.
Total weight
Protection class
Controls Elements
1 Spindle locking button
2 Vacuuming hood
3 On/Off switch
4 Auxiliary handle
5 Brush insert
6 Torx screw
7 Grinding tool
8 Screw
9 Torx key
10 Vacuum opening
Abgebildetes oder beschriebenes Zubehor gehort
teilweise nicht zum Lieferumfang.

Noise/Vibration Information

Measured values determined according to
EN 60 745.
Typically the A-weighted noise level of the tool are:
Sound pressure level: 85 dB (A).
Soun d power level: 98 dB(A).
Inaccuracy of measurement K = 3 dB (A).
Wear ear protection!
Th e typical weighted acceleration is 4,5 m/s
Inaccuracy of measurement K = 1 m/s

Intended Use

The machine is intended for the removal of plaster,
paint, adhesive residue, coatings, and rust as well as
the cleaning of concrete, metal and wood surfaces.
The machine may be used only for dry grinding.
All manuals and user guides at all-guides.com
RGP 3
750 W
-1
18 500/15 000 min
M 4 (left-hand)
-1
35 m • s
2 x 44 mm, 1 x 35 mm
2,6 kg
2
.
2
.
Notes on Safety Prevention
Safe operation of this machine is pos-
sible only when the operating instruc-
tions and the safety precautions are
read completely and the instructions
contained therein are strictly
observed.
For further notes on safety refer to enclosed
Sheet.
The machine is not qualified for operation in
environments where danger of explosion exists.
Always inspect cable and plug before using
machine. Only have damage repair by a qualified
professional.
For work outdoors, use only extension cables
and coupling plugs that are certified for such use.
The dust generated when working is injurious to
health. Use dust vycuuming and wear dust pro-
tection masks when working.
Do not work with material containing asbestos.
When grinding metal, saprks are genrated.
Because of the danger of fire, no combustible
material must be present in the area of flying
sparks.
Provide for secure footing when working.
Always place the cable to the rear away from the
machine.
Apply the machine to the material to be worked
only after it has been switched on.
Wear protective goggles and ear protector
The machine must not be used when damp and
must not be operated in a wet environment.
Clamp the workpiece securely in case it does not
remain in position from its own weight.
Do not carry the tool by the power cord.
Put the plug into the main socket only when he
machine is switched off.
Always remove the plug from the power supply
socket before carrying out any work on the
machine.
Use only grinding tools whose allowable speeds
are at least as high as the highest no-load speed
of the machine.
Press the spindle locking button only when the
grinder spindle is at a standstill.
Persons under 16 are not permited to use the
appliance.
7