Robust RB-BS 850/1 Manual De Instrucciones Original página 12

Anleitung_RB_BS_850_1_SPK7__ 02.07.12 09:30 Seite 12
GB
correctly attached and correctly used. The
use of a dust extraction system can reduce the
danger posed by dust.
4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the
correct tool for your work. You will be able to
work better and more safely within the given
performance boundaries.
b) Do not use an electric tool with a defective
switch. An electric tool that cannot be switched
on or off is dangerous and must be repaired.
c) Pull the plug out of the socket and/or remove
the battery before making any adjustments to
the appliance, changing accessories or put
the appliance down. This safety measure
prevents starting the electric tool unintentionally.
d) Keep unused electric tools out of the reach
of children. Do not allow people who are not
familiar with the appliance or who have not
read these instructions to use the appliance.
Electric tools are dangerous if they are used by
inexperienced people.
e) Clean your electric tool carefully. Check
whether moving parts are functioning
properly and not jamming, whether parts are
broken or damaged enough that the
functioning of this electric tool is affected.
Have damaged parts repaired before using
the appliance. Many accidents are caused by
badly maintained electric tools.
f) Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
g) Make sure to use electric tools, accessories,
attachments, etc. in accordance with these
instructions. Take the conditions in your work
area and the job in hand into account. Using
electric tools for any purpose other than the one
for which they are intended can lead to
dangerous situations.
5. Service
a) Have your electric tool repaired only by
trained personnel using only genuine spare
parts. This will ensure that your electric tool
remains safe to use.
Additional safety instructions
This tool may only be used for dry
n
grinding/sanding operations.
Always guide the power cable away from the back
n
of the tool.
Use of the tool on materials containing asbestos
n
12
All manuals and user guides at all-guides.com
is prohibited.
Always remove the plug from the power supply
n
socket before carrying out any work on the
machine (cleaning the sander, changing the
sandpaper, etc.).
Always disconnect the machine by removing the
n
plug from the socket, not by pulling on the power
cable.
To protect your health, always wear safety
n
goggles and a dust mask during sanding work.
Keep your workplace clean and well illuminated.
n
Make sure that the workpiece is sufficiently
n
secured so that it cannot slip.
Keep children away.
n
For your own sake, keep the machine clean at all
n
times and check it for signs of damage each time
after using it.
Make sure that the switch is set to OFF before
n
you insert the plug into the power supply socket.
Make sure of your footing, particularly when
n
working on ladders and platforms.
Touching or inhaling this dust can be harmful for
n
the operator and other persons nearby.
Hold the equipment by the insulated handles
n
because the grinding/sanding belt may strike the
equipment's own power cable. Damaging a live
cable may make the metal parts of the equipment
live and cause an electric shock.
If you discover any damage to the machine, use
n
the exploded diagram and the spare parts list to
determine which parts need to be ordered from
Customer Service.
Important! Wear safety goggles and a dust
n
mask.
Do not lose these safety instructions
2. Layout and items supplied
(Fig. 1 – 2)
2.1 Layout
1. Additional handle
2. Setting for sanding/grinding belt adjustment
3. Setting wheel for belt speed
4. Locking button
5. ON/OFF switch
6. Connection for dust bag
7. Handle
8. Drive rollers
9. Sanding/grinding plate
10. Clamping lever for sanding/grinding belt
11. Sanding/Grinding belt
12. Dust bag