Package Content List - Blaupunkt BP3035 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
SPECIAL SAFETY INSTRUCTIONS FOR ANGLE GRINDERS
Check that the maximum speed indicated on the grinding disc corresponds to the maximum speed of the machine.
The speed of the machine must not exceed the value on the grinding disc.
Make sure that the dimensions of the grinding disc correspond to the specifications of the machine.
Make sure that the grinding disc has been mounted and fastened properly. Do not use reducing rings or adapters to
make the grinding disc fit properly.
Treat and store grinding discs in conformance with the supplier's instructions.
Do not use the machine for grinding workpieces with a maximum thickness exceeding the maximum grinding depth
of the grinding disc.
Do not use grinding discs for deburring.
When grinding discs have to be mounted on the thread of the spindle, make sure that the spindle has sufficient thread.
Make sure that the spindle is sufficiently protected and does not touch the grinding surface.
Before use, inspect the grinding disc for any damage. Do not use grinding discs which are cracked, ripped or otherwise
damaged.
Before use, let the machine run idle for 30 seconds.
Immediately switch off the machine in case of abnormal vibrations or occurrence of another defect. Carefully inspect
the machine and grinding disc before switching the machine on again.
Make sure that sparks do not put people into danger or that they contact highly flammable substances.
Make sure that the workpiece is sufficiently supported or clamped. Keep your hands away from the surface to be cut.
Always wear safety goggles and hearing protection. If desired or required also use another kind of protection like for
example an apron or helmet.
Ensure that mounted wheels and points are fitted in accordance with the manufacturer's instructions.
Ensure that blotters are used when they are provided with the bonded abrasive product and when they are required.
If a guard is supplied with the tool never use the tool without such a guard.
For tools intended to be fitted with threaded hole wheel, ensure that the thread in the wheel is long enough to accept
the spindle length.
Ensure that ventilation openings are kept clear when working in dusty conditions. If it should become necessary to
clear dust, first disconnect the tool from the mains supply (use nonmetallic objects) and avoid damaging internal parts.
Though poor conditions of the electrical mains, shortly voltage drops can appear when starting the equipment. This
can influence other equipment (eq. blinking of a lamp). If the mains-impedance Zmax <0.348 Ohm, such disturbances
are not expected (in case of need, you may contact your local supply authority for further information).
With suitable accessories, the angle grinder can be used for grinding and cutting (With a cutting disk) metal or stone.
To use the tool for cutting, purchase a suitable cutting disk (not included in the product package-purchase it at a store
that offers such accessories). Following the instructions contained in this manual will ensure safe use of the appliance.
The product is designed for private/household use only, not suitable for professional use.
WARNING!
FOR YOUR OWN SAFETY, READ THIS MANUAL AND THE GENERAL SAFETY INSTRUCTIONS CAREFULLY BEFORE USING THE
APPLIANCE. YOUR POWER TOOL SHOULD ONLY BE GIVEN TO OTHER USERS TOGETHER WITH THESE INSTRUCTIONS.

PACKAGE CONTENT LIST

Open the package and carefully remove the product. Ensure that the product package is complete and none of
its components is damaged. Check that plastic parts and the power cord are not damaged. If any part is damaged
or missing, contact the dealer and do not use the product. Keep the package or recycle it in accordance with the
applicable regulations.
WARNING!
PACKAGING MATERIALS ARE NOT TOYS!
CHILDREN MUST NOT PLAY WITH PLASTIC BAGS! THERE IS A DANGER OF SUFFOCATION!
• The package should contain the following:
1 x angle grinder
1 x auxiliary handle
WHEN PARTS ARE MISSING OR DAMAGED, PLEASE CONTACT YOUR DEALER.
Open the package and carefully remove the product. Ensure that the product package is complete and none of
its components is damaged. Check that plastic parts and the power cord are not damaged. If any part is damaged
or missing, contact the dealer and do not use the product. Keep the package or recycle it in accordance with the
applicable regulations.
All manuals and user guides at all-guides.com
1 x pin spanner
1 x instruction manual
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido