ORIUM 11150 Manual Del Usuario página 9

24h flashes: select the 12 or 24-hour time format using the "+" or "-"
-
buttons, validate the setting by pressing the "MODE" button again to set
the 12 or 24-hour time format.
RCC ON and
-
control signal (for example, if you are in a country such as Portugal or
Southern Spain where the signal cannot be captured or in a
topographical zone where the signal is not received correctly, etc.). If
you select RCC OFF: your clock will never receive the signal (the
time/date and winter/summer time changeover will need to be set
manually). The
RCC ON: the automatic radio wave search process is activated, your clock will
be able to search for the signal daily, adjust to the exact time and changeover
from winter to summer time automatically.
Press the "MODE" button to validate the setting.
00 flashes - this is the setting for the timezone in relation to the radio-
-
control signal aerial located in Germany. For example, if you set +02
(+), when the clock captures the radio-controlled signal, it will adjust to
+2hrs in relation to German time and therefore, Western Europe. Leave
00 by default. Press "MODE" to confirm your setting
The hours flash Use the "+" or "-" buttons to set the correct hour. Press
-
"MODE" to confirm your setting
The minutes flash Use the "+" or "-" buttons to set the correct minutes.
-
Press "MODE" to confirm your setting
The year flashes. Use the "+" or "-" buttons to set the correct year.
-
Press "MODE" to confirm your setting
The months flash. Use the "+" or "-" buttons to set the correct month.
-
Press "MODE" to confirm your setting
The date flashes. Use the "+" or "-" buttons to set the correct date.
-
Press "MODE" to confirm your setting
The clock displays the calendar and time previously set.
For your information:
If you do not press a button after around 20 seconds, the clock will
automatically switch to normal display mode.
Settng of the time for the daily alarms:
4.
This clock has two alarms.
Setting alarm 1
Press the "MODE" button once: the hour for alarm 1 and
(6am by default)
Hold the "MODE" button down for 3 seconds:
The hour for alarm 1 flashes Use the "+" or "-" buttons to set the
-
required hour for alarm 1. Press "MODE" to confirm your setting
The minutes flash Use the "+" or "-" buttons to set the minutes for
-
alarm 1. Press "MODE" to confirm your setting
flash: you can opt to activate or deactivate the radio-
button will also be inactive.
.
are displayed