Publicidad
Idiomas disponibles
Idiomas disponibles
Pressure washer's water pumps need relatively low oil
maintenance.
However, in case of leak, stop the appliance immediately
and call technical assistance to repair the appliance.
Cleaning
Clean the washer after each use. Careful handling protects
the power tool and extends its service life.
Storage
The appliance should be stored in a dry place, especially in
winter, to avoid damages cause by ice.
1. After stopping the washer, remove all water from the
pump, press the gun trigger (2) until there's no water
coming out of the nozzle (16);
2. Disassemble high-pressure hoses, gun and lances;
3. Drain the water from all accessories and use a cloth to
clean hoses' external parts and other accessories,
4. Clean the water inlet filter and nozzle;
5. Put the cover on the water inlet filter;
6. Store the appliance in a clean and dry place.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools in your household
waste!
According to the European Directive 2012/19 /EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can obtain information regarding the disposal of the
power tool through the person in charge for the recycling
in your city.
Tel.:
+351 256 248 826
E-mail:
international@centrallobao.pt
Website:
www.centrallobao.pt
Publicidad
