Installation Instructions - Hansgrohe Secuflex 28380 Serie Instrucciones De Montaje

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The product may not be used as a holding handle. A
separate handle must be installed.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• Optimal functioning is only guaranteed with the
combination of Hansgrohe hand showers and
Hansgrohe shower hoses.
• If the Secuflex-Box is installed improperly or not at
all, the warranty will become invalid.
Technical Data
Rate of flow by 0,3 MPa:
Thermal disinfection:
Safety against backflow
The product is exclusively designed for drinking water!
4
24 l/min
(1 MPa = 10 bar = 147 PSI)
max. 70°C / 4 min
Assembly (see page 32)
English
Symbol description
Do not use silicone containing acetic acid!
Maintenance check valve
(see page 40)
The check valves must be checked regularly
according to DIN EN 1717 in accordance with
national or regional regulations (at least once
a year).
Maintenance Secuflex hose
(see page 40)
Repeat cleaning when pull out becomes
difficult.
Dimensions (see page 37)
Spare parts (see page 42)
XXX = Colors
000 = Chrome Plated
020 = Polished Chrome
130 = Polished Bronze
140 = Brushed Bronze
250 = Brushed Gold-Optic
260 = Brushed Chrome
300 = Polished Redgold
310 = Brushed Redgold
330 = Polished Black Chrome
340 = Brushed Black Chrome
800 = Stainless Steel Optic
820 = Brushed Nickel
830 = Polished Nickel
930 = Polished Brass
950 = Brushed Brass
990 = Polished Gold-Optic
Cleaning (see page 38)
Operation (see page 39)