ABC Design Cobra Instrucciones De Uso página 10

8. Fastening the harness
a.
To fasten the harness, bring the top two plastic catches together and interlock them.
b.
Then insert the interlocked catches into the bottom part of the fastening.
9. Unfastening the harness
To open the harness, press the button on the side.
WARNING:
in that position.
in this position.
12. Folding the pushchair
To fold the pushchair, bring the handle to its lowest position as described in point 19, holding the button
Now rotate the knob (2) to the left and push the handle down.
WARNING: Ensure that all the catches are engaged before use.
Lift the side panels of the carrier.
14. Attaching the cot bumper
Fasten the press studs and close the Velcro fastenings on the sides.
15. Attaching the hood to the cot bumper
Fasten the press studs on the bottom of the hood onto the bumper.
EN