PICO G2 Serie Guia Del Usuario página 18

• Screen Re-centering
Wear the VR Headset and look straight ahead, press and hold the HOME but-
ton of the controller for more than 1 second to re-center the screen.
• Disconnect the controller
You do not need to shut down the controller, the controller will automatically
shut down to save power in the following state:
-
of time)
-
-
• Add a new controller
If you need to add a new controller (VR Headset can only connect one con-
troller at the same time), or connect it again after disconnected the control -
ler, you can press the controller's HOME button to turn the controller on, enter
"Settings" -> "Controller", and select the controller you need to connect to
complete the connection.
• Controller hardware reset
If the controller appears by the HOME button and any button state light had
no reaction or virtual controller can't move in the VR Headset. Please reinstall
the controller's battery to complete the hardware reset.
15