Exhaust Filter Changing - KENMORE ELITE BC7005 Manual De Uso Y Cuidado

WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged exhaust
filter or without the exhaust filter
installed. Do not operate without filter
cover installed.
EXHAUST FILTER - HEPA MEDIA
The exhaust filter cartridge must be
replaced when dirty. Replace the filter
when the entire surface area is covered
evenly. The filter CANNOT be washed as
it will lose its dust trapping ability.
NOTE: See REPLACEMENT PARTS for part
number detail (page 5).
1. Press latch to release the exhaust filter
cover from slot in canister.
2. Pull filter cover down and outward to
remove it from filter chamber in the canister.
Latch
Filter
Cover
3. Remove the exhaust filter cartridge.
Exhaust
Filter

EXHAUST FILTER CHANGING

- 21 -
4. Insert the exhaust filter cartridge. Place
the new filter into the canister with the
rubber seal towards the canister.
Exhaust
Filter
5. To replace the exhaust filter cover, insert
the two tabs on the cover into the slots at the
top of the filter chamber.
Tabs
6. While holding latch down rotate filter
cover into place.
7. Release latch and verify that filter cover
is locked into place.
1
Push
Here
2