SBS TECONFSPEAKBTK Manual Del Usuario página 5

is complete, the LED will remain steady and blue. NB: a long
press on the (8) button will disconnect the paired device,
putting the speaker back into search mode.
"Wired" mode:
Turn on the speaker and connect it to your PC using a USB
Type-C cable. Quickly press the (9) button to switch to "Wired"
mode, the central white LED will come on.
Volume control:
hold down the (11) button to increase the volume; press and
hold the (10) button to decrease the volume.
Call mode:
When a call comes in, the status indicator flashes green.
Press the (1) button to answer; the indicator will become
steady and green. Press the (1) button again to hang up. Long
press the (1) button to reject the call.
Press the (6) button to turn off the microphone; the indicator
will turn red.
Battery:
when the battery is very low, the indicator will flash red.
To recharge it, connect the speaker to a suitable charger:
the indicator will become steady and red, turning off when
charging is complete.
5