Introduction To Use - Femi 240 Instrucciones Para El Uso Y Manutencion

All manuals and user guides at all-guides.com
INDEX
1 INTRODUCTION TO USE .................................... 10
2 INSTALLATION ....................................................... 11
3 ADJUSTMENT ........................................................ 12
4 MAINTENANCE ...................................................... 14
1 INTRODUCTION
Please read these instructions carefully in order to learn
how to use this machine and how to deal with any
contraindications. Keep these instructions in a safe place:
they are an integrating part of the machine.
This instruction manual is an integral part of the machine
and therefore must be kept complete and handled with
care. Always refer to the contents reported in this manual
for carrying out all the operations required for using the
machine to the best advantage and under utmost safety
conditions.
Use the machine solely and exclusively for the uses
outlined below, as recommended in this manual, and do not
attempt to tamper with it, force it or use it for other purposes.
1.1 CONVENTIONAL SYMBOLS
Never underestimate the warnings "ATTENTION -
CAUTION" given in this manual.
In order to draw the user's attention and to preserve safety,
hazardous operation are preceded by symbols and notes
that point out the danger and explain how to behave to
avoid any risk.
These symbols and notes are divided in three categories,
identified by the following words:
WARNING: dangerous-behaviours that could
cause serious injuries.
CAUTION: behaviours that could cause slight
injuries or damages to things.
NOTE: the notes preceded by this symbols are
technical and are aimed at making operations
easier.
10
1.2 STANDARDS ON SAFETY
The machine has been designed and manufactured
conforming to the norms set forth by the following prevailing
Machinery Directives: EEC 98/37 - EEC 73/23 - EEC 89/
336
The annexed CE Declaration of Conformity, together with
the CE mark attached to the product, constitute an essential
element and are an integral part of the machine: they
guarantee that the product duly conforms to the aforesaid
safety Directives.
1.3 TYPE OF USE
This machine has been conceived and manufactured to
remove material, such as tool grindings or lappings, from
any type of metal.
In the bench grinder and polishing machine (combined
version) the shaft is fitted with an extension on one or both
sides, where it is possible to fit several types of brushes
(such as with steel wires, with abrasive blades or in fabric)
suitable for any type of metal.
Avoid using it for any other type of use that is not foreseen
by these instructions.
1.4 SAFETY REGULATIONS
- Do not use the machine outdoors, in humid places or in
the presence of gas or flammable liquids.
- Put the machine in a well lit working area: this is
extremely important in preventing work accidents.
- Do not force the machine unnecessarily: excessive
pressure could cause the grinding wheel to deteriorate
very quickly, the machine's performances could worsen
and the motor be damaged by overheating.
- Each time a machine operation is finished, turn off the
machine switching it to position "O".
- Avoid wearing loose-sleeved work clothes or
accessories such as scarves, neck-chains or bracelets
which could be hooked by the moving parts.
- Always use protection devices: accident prevention
eyeglasses as foreseen by regulations, headsets or
earphones and if necessary, caps to hold back loose
hair.
- Do not use the electric feeding cable to lift the machine
or to take off the plug from the current tap. Avoid
contact with sharp edges, oils and high temperatures.
1.5 DESCRIPTION OF THE MACHINE
- (Picture 1a: bench grinder)
- (Picture 1b: combined bench grinder)
- (Picture 1c: polishing machine)
- (Picture1d: bench grinder/sander)
1. MACHINE BODY
2. TURNING-ON SWITCH
3. ABRASIVE GRINDING WHEEL
4. TRANSPARENT SPARK ARRESTERS
5. SAFETY CAP
6. PIECE-REST