Technical Data; Safety Instructions - auna W2-AC200 Manual Del Usuario

EN
12

TECHNICAL DATA

Output power
Amplifier output power
Input sensitivity
S/N ratio
Speaker impedance
Subwoofer frequency
Power supply
Dimensions
Accessories

SAFETY INSTRUCTIONS

• Always keep these instructions in a safe place so that you can access
them at any time.
• Use the product only as described in the instructions. Any other use
may lead to damage to the product or in the vicinity of the product.
• Modifying or changing the product will compromise product safety.
• Handle the product carefully. It can be damaged by bumps, blows or
falls from a small height.
• Keep the product away from moisture and extreme heat.
• Do not open the device under any circumstances. The warranty is void if
the unit is tampered with by third parties.
• Incorrect assembly may lead to malfunctions or total failure.
• The device should be protected from any moisture and direct sunlight.
• Never use cleaning agents for cleaning, only a dry microfibre cloth.
• Never open the product without authorisation and never carry out
repairs yourself! Repairs to the device may only be carried out by a
specialist workshop.
90 W x 2
2000 W Max.
High: 1.0 - 2.0 V impedance 100 Ohm
Low: 0.1 - 1.0 V impedance 10 kOhm
Better than 95 dB
4-16 Ohm
Adjustable 30 Hz - 250 Hz
DC 14.4 V
250 x 245 x 52mm
Screws & spare fuse