Audio Setup - M-Audio M-Track 2X2 Vocal Studio Pro Guia Del Usuario

Audio Setup

Windows users: Before connecting M-Track 2X2 to your computer, install the driver:
1. Go to m-audio.com/drivers
operating system.
2. Open the file you downloaded and double-click the driver installer file.
3. Read the End-User License Agreement, then check the box to Agree and click Next to
continue.
4. Click Install to begin the installation. You may be asked to connect M-Track 2X2 to your
computer during the installation process. Click Install on any further system messages
during the installation.
5. Once the installation is complete, click Finish.
To use the Windows driver, open the M-Audio M-Track 2X2 Control Panel. Here, you can
set your Preferred Buffer Size and Sample Rate.
To set M-Track 2X2 as your default playback device, follow the directions below based on
your computer's operating system.
Windows:
1. Use the included USB cable to connect the M-Track 2X2 to your computer.
2. In the Taskbar, locate the Volume Control "speaker" icon. Right-click the speaker and
select Playback Devices.
Alternatively, go to Start Menu > Control Panel (or Settings > Control Panel in Classic
View) > Hardware and Sound > Sound.
3. In the Windows Sound control panel select the Playback tab and select M-Track 2X2 as
the default device.
4. Click the Recording tab and select M-Track 2X2 as the default device.
5. Click Properties in the lower right-hand corner.
6. In the new window, click the Advanced tab and select 2-channel, 24-bit, 48000 Hz
(Studio Quality) as the default format.
7. Uncheck both boxes under Exclusive Mode.
8. Click OK to close the Properties window.
9. Click OK to close the Sound control panel.
4
and download the latest M-Track 2X2 driver for your