M-Audio M-Track 2X2 Vocal Studio Pro Guia Del Usuario página 5

Mac OS X:
1. Use the included USB cable to connect the M-Track 2X2 to your computer.
2. Go to Applications > Utilities > Audio MIDI Setup.
3. In the Audio Devices window, select M-Track 2X2 in the left column.
4. Right-click M-Track 2X2, and select Use this device for sound input.
5. Right-click M-Track 2X2, and select Use this device for sound output.
6. Quit Audio MIDI Setup.
Setting Up M-Track 2X2 with Your Software
Be sure your audio software program is set up to receive audio from the M-Track 2X2. This
can usually be done in your software's Preferences, Device Setup, or Options. Please
consult your software manual for more information.
To set up the M-Track 2X2 with Cubase LE:
1. Use the included USB cable to connect the M-Track 2X2 to your computer.
2. Open Cubase LE.
3. Go to Devices > Device Setup, and click VST Audio System in the left side of the
window.
4. Open the dropdown menu at the top and select M-Audio M-Track 2X2 ASIO. Click
Switch to confirm.
Note: For Mac users, select M-Audio M-Track 2X2.
5. Click OK to close the Device Setup window.
You can now add audio tracks to receive audio from sources connected to the M-Track 2X2
inputs and stream recorded audio back through the M-Track 2X2 outputs.
5