Mr Handsfree Blue Luxe Guía De Referencia Rápida

QUICK REFERENCE GUIDE
GB F NL D
www.mrhandsfree.com
(2) MF-Button (3) Charger connector
(1) Indicator light
(4) Adapter DC output
GETTING STARTED
CHARGING THE BATTERY
1. Plug the Travel Charger (5) into an AC outlet.
2. Connect the adapter (4) into the headset (3) as shown in the picture. Gently press the
adapter until it clicks into place.
3. The red indicator (1) on the headset will light up.
4. When the battery is fully charged, the red indicator (1) on the headset will turn off and
the blue indicator (1) will turn on.
Important!
• For first time use it is very important to charge the battery of the Blue LUXE headset for
24 hours. This ensures the good sound quality of your headset.
• For first time use it is also possible that the battery capacity is too low. It could take
some time before the red indicator lights up.
MAIN FUNCTIONS MULTIFUNCTIONAL BUTTON
Power on/off, Pairing, Answer / End / Transfer calls, Voice dialing, Redial
All manuals and user guides at all-guides.com
Luxe
E I GR DK RU
(5) 100/240V Travel charger
We, the undersigned
Company:
Address:
declare, that the following equipment:
Product Name:
Product Type:
Is in conformity with the Directions of the European Union
Conformity of the Bluetooth headset with the above-mentioned directions is guaranteed by the CE-symbol.
®
MAKING CALLS
GB
Once the Blue LUXE headset is successfully paired with your mobile phone, you can use
it to make and receive calls.
The Blue LUXE headset can be used with voice dialing if your mobile phone supports
this feature.
1. Using voice dialing:
Press the MF-button (2), wait for a beep and say the name of the person you want to call.
2. Using the phone keys to make a call:
Enter and dial the number on the mobile phone as you normally do. Once the call has
been set up, the sound will be transmitted to your headset automatically.
3. Redial:
Press and hold the MF-button (2) for 2 seconds to redial the last number you called.
ANSWERING / ENDING CALLS
When the Blue LUXE headset is turned on and there is an incoming call, you will hear a
musical tone.
- Press the MF-button (2) to answer the call.
- Press the MF-button (2) to end the call.
Note: Due to the different designs of some mobile phones, an auto-disconnect may happen
even when the Blue LUXE headset is turned on. In that case, the headset won't ring when
there is an incoming call. Press the MF-button (2) for 1 sec. to reconnect the headset with your
QRG / Blue Luxe / 07-12 / V04
DECLARATION OF CONFORMITY
TE-GROUP nv
Kapelsestraat 61, 2950 Kapellen - BELGIUM
BLUE LUXE
Bluetooth headset
®
EC R&TTE Directive 1999/5/EC