Instructions For Assembly; List Of Spare Parts - Kettler STRATOS Manual Del Usuario

Instructions for Assembly

I Ensure that you have received all the parts required (see check list)
and that they are undamaged. Should you have any cause for com-
plaint, please contact your KETTLER dealer.
I Before assembling the equipment, study the drawings carefully and
carry out the operations in the order shown by the diagrams. The
correct sequence is given in capital letters.
I The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
I Please note that there is always a danger of injury when working
with tools or doing manual work. Therefore please be careful
when assembling this machine.
I Ensure that your working area is free of possible sources of danger,
for example don't leave any tools lying around. Always dispose
packaging material in such a way that it may not cause any
danger. There is always a risk of suffocation if children play
with plastic bags!
List of spare parts page 26-27
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the product
(see handling).
Example order: Art.no. 07969-560 / spare-part no. 67000170 /
2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be used
for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (internal)
packaging, which is safe for transportation, in the original box if pos-
sible.
It is important to provide a detailed defect description / damage report!
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words „with fastening
material".
All manuals and user guides at all-guides.com
I The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as instructed.
The required tools are supplied with the equipment.
I Bolt all the parts together loosely at first, and check that they have
been assembled correctly. Tighten the locknuts by hand until resis-
tance is felt, then use spanner to finally tighten nuts com-
pletely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function cor-
rectly (the locking device is destroyed), and must be replaced.
I To pull off the pedal arms remove cap and screw (A). Grip the pedal
arm tightly, and screw in an M12 bolt (not supplied) into the
thread (B). After a few turns you may take off the pedal arm (C).
I For technical reasons, we reserve the right to carry out preliminary
assembly work (e.g. addition of tubing plugs).
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please
dispose of this article correctly and safely (local refuse sites).
KETTLER (GB) Ltd.
GB
Merse Road · North Moons Moat · Redditch,
Worcestershire B98 9HL · Great Britain
http://www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road · Virginia Beach · Virginia VA
23450 USA
http://www.kettlerusa.com
5