Eton WEATHER TRACKER FR800 Manual De Usuario página 8

All manuals and user guides at all-guides.com
SETTING ALERT MODE (SIREN or VOICE)
Turn off the radio and press the MENU button. SETUP TIME appears in the
display. Press the
display, with SIREN or VOICE to its right. Press the
or VOICE flashes. Press the
to hear when an ALERT is activated. Press MENU twice to exit and save
the setting.
While the alert SIREN is activated, you can press the ON/OFF ALERT
button at the top of the radio to turn it on or off.
SETTING S.A.M.E
Codes in the US, CLC Codes in Canada
• S.A.M.E. = Specific Area Message Encoding
• CLC = Canadian Location Codes
8
A six-digit code instructs the radio only to receive an ALERT when the
code is programmed in. There are far too many S.A.M.E and CLC codes
to include them all in this manual. We therefore provide the following
to assist you in looking up the code for your area.
Look up a United States county code at the following web site:
http://www.nws.noaa.gov/nwr/indexnw.htm#sametable
Look up a Canadian CLC code at:
http://www.msc-smc.ec.gc.ca/msb/weatheradio/transmitter/index_e.cfm
Your radio can be set for one (SINGL) to 23 (MULTI) codes, or can be set
to receive ALL coded information sent from any transmitter, if you're
within range. When you set codes, it will only pick up alerts when you're
in that county or within reception distance of the signal. ALL, MULTI
or SINGLE COUNTY will appear in the lower left side of the display,
depending on how you have set it.
button twice. ALERT appears in the upper part of the
buttons to select the one that you wish
.
button and SIREN