Receiving A Call; Making A Call - Daewoo International DTC-360 Guia Del Usuario

RECEIVING A CALL

From handset
1. Pick up the handset and talk to the other party.
2. When finished, return the handset to the base.
Switching to speakerphone
1. When using the handset, press
2. When finished, press
From speakerphone
1. When the telephone rings, press
voice clearly, speak into the speaker from a distance of 32cm or less.
2. When finished, press
Note: Generally telecom transmits the incoming message between the first ring and the second
ring. So please answer calls after the second ring.

MAKING A CALL

From handset
1. Pick up the handset.
2. When you hear the dial tone, dial the desired number.
3. The phone will start to time the conversation after 6 seconds.
4. When finished, return the handset to the base.
From Speakerphone
1. Press key. When you hear the dialing tone, dial the desired number.
2. The phone will start to time the conversation after 6 seconds.
3. When finished, press
Pre-dialing function
1. At on-hook state, dial the number using numerical key, if a mistake use DEL key to edit.
2. Press REDIAL key, the pre-dialed number will be auto-dialed out.
a) Redial function
1. Pick up the handset or press
2. Press REDIAL key, the last dialed number will be dialed again.
b) Auto-redial function
1. Press key, dial a number, if you hear an engaged tone.
2. Press REDIAL key and the dialed number will be redialed automatically at every 6 seconds
until the line is through.
3. The phone will redial the same number automatically maximum for 15 times.
When there is an incoming call while using auto-redial, pick up the handset or press
answer the call. The auto redial function will be terminated.
All manuals and user guides at all-guides.com
key and return the handset to the base.
key again.
key and talk to the caller. For the other party to hear your
key again.
key again.
key,
21
key to