Haier XQB60-91BF Manual Del Usuario página 14

All manuals and user guides at all-guides.com
XQB60-91BF MANUAL 10/22/01
English
Selecting Water Level:
When you turn the power "ON", the initial water level is set at 6th position.
Note: • For normal, synthetic and gentle cycle, you can select water level
between 1-10 position.
• In the quick cycle mode the water level is preset to the 2nd position. The
washer begins to wash clothes once the water has reached the 2nd
level. Water in this mode fills until the 4th level is reached.
Press the water level button to increase or decrease the water level as indicated in
the chart below to select the proper water level setting for the load size.
Water Level Button
Preset from the factory
Press one time for
Press two times for
Press three times for
Press four times for
Press five times for
Press six times for
Press seven times for
Press eight times for
Press nine times for
Press ten times to go back
to its preset position
Note: Position "1" as the lowest level.
Position "5" as the medium level.
Position "10" as the highest level.
13
11:42 AM Page 14
Water Level Position
6
7
8
9
10
1
2
3
4
5
6