Introduction; Device Description (Fig. 1 - 3); Scope Of Delivery - Scheppach BGS700 Traducción Del Manual De Instrucciones Original

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope you have a lot of fun and success using your
new machine.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• improper handling,
• noncompliance of the operating instructions,
• repairs by third parties, not by authorized service
technicians,
• installation and replacement of non-original spare
parts,
• non-intended use,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regulations
and VDE regulations 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the de-
vice. The operating instructions are intended to help
the user to become familiar with the machine and take
advantage of its application possibilities in accordance
with the recommendations. The operating instructions
contain important information on how to operate the
machine safely, professionally and economically, how
to avoid danger, costly repairs, reduce downtimes and
how to increase reliability and service life of the ma-
chine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country. Keep the operating instructions package with
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture. Read the instruc-
tion manual each time before operating the machine
and carefully follow its information. The machine can
only be operated by persons who were instructed con-
cerning the operation of the machine and who are in-
formed about the associated dangers.
20 | GB
The minimum age requirement must be complied with.
In addition to the safety notices contained in this op-
erating manual and the particular instructions for your
country, the generally recognised technical regulations
for the operation of identical devices must be com-
plied with.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions and
the safety information.

2. Device description (Fig. 1 - 3)

1. Safety glass
2. Spark deflector
3. Spark deflector adjusting screw
4. Fastening screw Safety glass holder
5. Guard hood
6. Grinding wheel
7. Workpiece support star screw
8. Workpiece support
9. Grinding / sanding belt
10. Belt guidance adjustment screw
11. Clamp screw for the top belt roller
12. Fastening screw for side cover
13. Side cover
14. Mounting point
15. Foot
16. On/Off switch
17. Coolant reservoir
18. Fastening screw for workpiece support

3. Scope of delivery

m Attention!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
• 1x Grinder/Sander
• 1x Instruction manual
• 1x Sanding disc
• 1x Sanding belt
• 1x Grinding wheel dresser
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the pack-
aging and transport bracing (if available).
• Check that the delivery is complete.
www.scheppach.com