Filling With Water - Rowenta IS8000 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
Disconnection of hose
To disconnect the hose from the base unit, firmly grasp
the hose connector at indentations.
Gently pull up on hose connector until hose releases.
Auto off
The Auto-off function prevents unit from overheating, but
does not switch-off the appliance.
Do not use as on/off switch.

Filling with water

The steamer can be used with REGULAR TAP WATER
(up to 12 grains of hardness). If your water is harder
than this, Rowenta recommends mixing half tap water
with half distilled water which reduces the hardness;
or just use inexpensive bottled spring water; or 100%
distilled water.
Battery water and water containing additives (such as
starch, perfume or fabric conditioner) may not be used in
the steamer. Such additives can affect the properties of
the steam and can form deposits.
Be sure that unit is unplugged. Remove
water tank from main unit by pulling
up. Unscrew the cover and fill. Do not
fill above the max line at the water
tank. Water tank capacity is 3,785 litres
(1 gallon).
Screw cover back onto tank when filled.
Firmly place tank back on the main
unit.

Publicidad

Tabla de contenido
loading

Tabla de contenido