Klarstein GALERAS Manual página 44

EN
44
INSTALLING THE DECORATIVE ACCESSORIES
Install logs/glass blocks and pebbles in the fuel bed
Note: Make sure that the installation corresponds to the fuel bed you have
purchased or selected.
1. The safety glass must be removed from the appliance and the appliance fixed
in its final position before the logs or stones can be installed.
2. If the fireplace is delivered with logs, take them out of the packaging and
place them in the designated place in the fireplace (see figure 16).
3. If the appliance is supplied with glass blocks, note that the glass blocks may
have fine oil residues which must be removed by thorough cleaning before
installation. Remove the residues with a mild detergent and then rinse the
glass blocks with clear water. Dry the glass blocks before placing them in their
designated place in the fireplace.
Figure 16