Protective Functions - Klarstein GALERAS Manual

EN
50
Activate/deactivate timer and temperature setting
1. When you press the TIMER button, "MON" flashes. Press the SETTINGS button
three times. "ON" flashes on the screen. Set the time at which the timer is to
be activated. Use the UP (+) or DOWN (-) buttons to set the hours and minutes.
When you press the DELETE button, the timer setting is deleted.
2. When you press the SETTINGS button, "OFF" flashes on the screen. Set the
time at which the timer is to be deactivated. Use the UP (+) or DOWN (-)
buttons to set the hours and minutes, If you press the DELETE button, the
timer setting is deleted. When you press the SETTINGS button again, the
digital screen shows "18". Use the HIGHER(+) and LOWER(-) buttons to adjust
the temperature. Press the HEAT button. Pressing the button once activates
the low heating level (900 W). "H1" is displayed on the LED screen. If you press
the button twice, the high heating level (1800 W) is activated. "H2" is displayed
on the screen. If you press the button again, the heating function is switched
off.
3. When you press the SETTINGS button again, "TUES" flashes on the digital
screen. Set the start time for Tuesday. To do this, use the HIGHER (+) and
LOWER (-) buttons. As soon as you press the SETTINGS button, "OFF" flashes
on the screen. Set the end time for Tuesday. To do this, use the HIGHER (+) and
LOWER (-) buttons. When you press the SETTINGS button again, the screen
displays "18". Adjust the temperature for Tuesday using the HIGHER (+) and
LOWER (-) buttons. Press the HEAT button. Pressing the button once activates
the low heating level (900 W). "H1" is displayed on the LED screen. If you press
the button twice, the high heating level (1800 W) is activated. "H2" is displayed
on the screen. If you press the button again, the heating function is switched
off.
4. Follow step 2 to make the settings for all other weekdays.

PROTECTIVE FUNCTIONS

Temperature warning function
If the appliance is in operation and the indoor temperature drops by more than
5 °C within 10 minutes, the appliance beeps three times to warn you. The heating
function is then deactivated. You should check whether windows are open.
Safety shutdown
• This appliance is equipped with a safety cut-out that is activated if the
appliance overheats (for example, due to blocked air vents). For safety
reasons, if the safety shutdown has been triggered, the appliance is not
automatically reset.
• To reset the appliance, disconnect it from the power supply for at least
15 minutes. Afterwards, plug the power cord back into the wall socket and
switch on the appliance.