senya SYCK-VC022 Manual De Instrucciones página 23

V. CLEANING AND MAINTENANCE
 Press the button to release the dust compartment.
 Remove the dust compartment.
 Remove the plastic filter and HEPA filter inside.
 Throw away the dust, as shown in the picture.
 Use the cleaning tool to remove any dust lodged in the plastic filter.
Problem
The device does not work.
The machine is unable to pick up
dust or is losing suction power.
The rolling brush does not work.
TROUBLESHOOTING
Cause
The battery is not charged.
The filter is blocked.
The dust compartment is full.
Something is preventing the bristles of the
brush from rotating.
23
Solution
Charge the battery.
Clean and wash the filter.
Empty the dust compartment.
Clean the interior of the brush.