Declaration Of Conformity - Beta 1949DGT/2 Manual De Uso E Instrucciones

EN
OPERATION MANUAL AND INSTRUCTIONS
• Tyre pressure adjustment
• - To deflate, gently press the lever to approximately half stroke. Release the liver to display tyre pressure.
• - To inflate, press the lever to stroke end. Release the liver to display tyre pressure.
Display light
After turning on the tool, press the on/unit/light key again, to enable the screen light.
If the tool is not used for 5 seconds, the light will be disabled.
Measurement unit selection
To select the unit of measurement, push and hold the on/unit/light key longer than 3 seconds; then press the key to select the
required unit of measurement from those displayed - PSI, BAR, KPA, KGF.
Auto power off
If the tool is not used for 90 seconds, it will turn off automatically. To turn it on, press the on/unit/light key.
When the tool is turned on, it will be set to the latest unit of measurement.
MAINTENANCE
Repair and calibration must be carried out by trained personnel only. For this operations, you can contact Beta Utensili S.P.A.'s
repair centre.
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product should be collected separately from
other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool can:
- deliver it to an appropriate collection facility for electronic or electrotechnical equipment;
- return it to the dealer upon purchase of a new, equivalent item of equipment;
- in case of a product for professional use only, contact the manufacturer which will arrange for the product to be properly
disposed of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents damage to the environment or
human health. Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste and will
give way to the application of such fines as provided for under current regulations
WARRANTY
This tool is manufactured and tested in accordance with current EU regulations, and is covered by a 12-month warranty
for professional use or a 24-month warranty for nonprofessional use. We will repair any breakdowns caused by material or
manufacturing defects by fixing the defective pieces or replacing them at our discretion. Should assistance be required once or
several times during the warranty period, the expiry date of this warranty will remain unchanged. This warranty will not cover
defects due to wear, misuse or breakdowns caused by blows and/or falls. In addition, this warranty will no longer be valid if any
changes are made, or if the pneumatic tool is forced or sent to the customer service in pieces. This warranty explicitly excludes
any damage to people and/or things, whether direct or consequential.


DECLARATION OF CONFORMITY

We hereby declare, assuming full responsibility, that the described product complies with all the relevant provisions
of the following Directives:
• Electromagnetic Compatibility Directive (EMC) 2014/30/EU;
• Directive concerning the restriction of the use of certain hazardous substances in electric and electronic
equipment (RoHS) 2011/65/EU;
The Technical Brochure is available at:
BETA UTENSILI S.P.A.
Via A. Volta 18
20845 Sovico (MB)
ITALY
7