Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
• Fix the top baffle to the top of the cabinet inner with screws, then install the
screw caps.
• Open the lower door of cabinet the maximum angle, and open the lower door of
the refrigerator to the corresponding position. Sliding the block to make sure inner
edge align with the lower door edge of refrigerator, then fix the block to the door
of cabinet with screw and install screw caps. Fix the upper refrigerator door to the
cabinet door in the same way.
• Take out the sealing strip from accessory bag, and press it in the gap between
the cabinet and the refrigerator. lnstallation is completed.
(The picture above is only for reference. The actual
configuration will depend on the physical product
or statement by the distributor)
Sealing strip
Block
11
Screw
Screw cap
V.1
Publicidad
Tabla de contenido
