Water Connections - EAS ELECTRIC EMWY86BI Manual De Instrucciones

SAFETY INSTRUCTIONS
Water and electrical connections must be carried out by a
qualified technician in accordance with the manufac-
turer's instructions and local safety regulations.
Warning!
！
•Don't use multiple plugs or extension cords.
• The appliance must not have an external switching device
such as a timer or connected to a circuit that is regularly
switched on and off.
• Do not pull the plug out of the mains outlet if there is
flammable gas around.
•Never pull out power plug with wet hands.
•Always pull at the plug, not at the cable.
•Always unplug the appliance if it is not being used.

WATER CONNECTIONS

Check the connections of the water inlet tubes, the water
tap and the outlet hose for possible problems due to
changes of water pressure. If the connections loosen or
leak close the water tap and get it repaired. Do not use the
appliance before the pipes and hoses are installed
properly by qualified persons.
Glass door may become very hot during the operation.
Keep children and pets far away from the machine while it
is operating.
The water inlet and outlet hoses have to be safely installed
and remain undamaged. Otherwise, water leakage can
occur.
Do not remove the drain pump filter while there is still
water in the appliance. Big quantities of water can leak
out, and there is a risk of scalding due to hot water.
6 V.1