Operation; Quick Start - EAS ELECTRIC EMWY86BI Manual De Instrucciones

OPERATION

Quick Start

Caution!
Before washing, please make sure the washer dryer is installed
properly.
Your appliance was thoroughly checked before it left the
factory. To remove any residual water and to neutralize
potential odors, it's recommended to clean your appliance
before first use. For this reason, start the Algodón program at
90°C without laundry and detergent.
Calibration
It's recommended to calibrate the washer dryer, so that
provide the best performance.
The appliance is able to detect the amount of laundry loaded.
This function is optimizing the product performance by
minimizing energy and water consumption, saving you
money and time. For this reason it's recommended to
calibrate the appliance for best use.
1- Remove all accessories from the drum and close the door;
2- Insert the mains plug to the socket;
3- Switch on the washer dryer and press "Speed" and "Delay "
simultaneously for 10 seconds until "t19" is displayed;
4- Press [
displayed.
] to start the appliance and wait till "****" is
14 V.1