Manual Driver Installation - EUROCOM Milano M360 Guia Del Usuario Concisa

Driver Installation Application
Insert the Device Drivers & Utilities + User's Manual
CD-ROM and the Driver Installation application will
run automatically.
Figure 14 - Driver Installation
All manuals and user guides at all-guides.com
Using the Driver Installation Application
1. Check the driver installation order from
page 24 (the drivers must be installed in this order)
which is the same as that listed in the menu on the left.
2. Double-click to select and run the driver you wish to
install.
3. Make a note of the drivers you have installed.
4. If the computer needs to restart after installing a driver,
and you will usually need to click the "Yes/Finish"
button when prompted to restart the computer.
5. Make sure you tick the "Show Install Menu next time
you start Windows when CD is Inserted" tickbox to
come back to the Driver Installation screen (otherwise
click Start (menu) > Run... and navigate (Browse..) to
D:\SETUP.EXE and click OK
OR
Double-click the My Computer icon, and then double-
click the CD icon).

Manual Driver Installation

Insert the Device Drivers & Utilities + User's Manual
CD-ROM and click Exit. Follow the instructions for each
individual driver as listed on the following pages.
Concise User's Guide
Table 6 on
Driver Installation - 25