System Configuration Utility - EUROCOM Milano M360 Guia Del Usuario Concisa

Concise User's Guide

System Configuration Utility

To enter the SCU, turn on the computer and press Ctrl-Alt-S simultaneously during the startup. You can use the
mouse or arrow keys to navigate through the menus. Use the Save and Exit item from the Exit menu to save changes.
Enable Padlock (Components Menu)
Activate Enable Padlock to type the numbers from the numeric keypad without having to hold down the Fn key.
Number Lock must be activated to use this feature. Once Number Lock is activated, press the Fn and Num Lock keys
simultaneously to enable the Padlock mode. When Padlock mode is enabled, and you press the yellow typeface nu-
meric keys, you will be able to type numbers directly without holding down the Fn key (holding Fn and pressing a
key on the numeric keypad will type a letter). To disable Padlock mode press the Fn and Num Lock keys again.
34 - System Configuration Utility
All manuals and user guides at all-guides.com
Insyde Software SCU For Intel chipset
Startup Disks Components Power Exit
√ Keyboard Numlock
Devices
Keyboard Repeat
Keyboard Type
Hard Drive C C C = 20Keyboard Repeat
√
Enable Padlock
Enable the numeric key pad lock function by pressing Fn+NumLock and NumLock
LED is on. This hotkey has no function for Japanese keyboard.
Figure 15
Components Menu (SCU)
Aug 16, 2004 6:40:02 am
System
CPU Clock = 1500MHz
Memory
Base = 640 KB
Extended = 490496 KB
Shadow = 64 KB
Reserved = 320 KB
Total RAM = 491520KB
Cache (Ext) = 512 KB